..\An-2m\Model
model.cfg - config file
an2p98.mdl - model for fs98 only
an2p2k.mdl - model for cfs1/2,fs2000/2002 (not for fs98!!!)
model98.zip - backup of model.cfg for fs98
model2k.zip - backup of model.cfg for cfs1/2, fs2000/2002
..\An-2m\Panel
panel.bmp
panel.cfg
panel98.zip - backup of panel.cfg for fs98/cfs1
panel2k.zip - backup of panel.cfg for fs2000/cfs2
- copy An-2p folder to ..\Fs98\Aircraft
- check in model.cfg for [models] - normal=An2p98
- check for sound aliasing
- if you using other FS98 panel:
In your panel.cfg file copy colour section from my panel.cfg
( [8 bit colors], color00...color31 ). This is only important
for properly color display of virtual cockpit in fs98 on dusk
and night. (Your panel will be not affected.)
-enjoy
- copy An-2p folder to ..\Fs98\Aircraft
- edit model.cfg for [models] - normal=An2p2k
- check for sound aliasing
- if you have problems with FS98 panels in CFS1:
Edit record in combatfs.cfg: PANEL_MASKING_OFF=0, and restart cfs.
-enjoy
- copy An-2p folder to ..\Fs98\Aircraft
- edit model.cfg for [models] - normal=An2p2k
- check for sound aliasing
- replace original panel.cfg with panel.cfg from panel2k.zip
-enjoy
Color settings in model.cfg for visual customise:
- color03 - polling for type of canopy cover
- color04 - if you don't like pilots set this colour to BLACK
Thanks for Andrei Bezmylov "Chukcha" for testing in fs98 and
for air file for this plane. Andrei say:
"> Maybe is tail still too much heavy?
Maybe. This is one thing I could never change in an air file without
affecting other flying characteristics. What I do I just set the trim
a little bit nose down before take off. ... but please mention that
I only MODIFIED the file. I did not make it from scratch. I'm not even
sure which An-2 it originally came from. Most probably it comes from
the ThomasDraexl's An-2."
Visit flightsim.ru for Andrei's planes and panels for fs98!!!
